The clothes tumble but do not dry. Armed with a multi-meter I checked the usual suspects: Thermal Fuse, Hi Temp Thermostat, Thermister, the Heating Element to find no open loops. A useful msg board thread directed my attention to this micro circuit board inside the control console. Stashed inside the console like an easter egg, I found bundled a diagnostic and trouble shooting guide. While test reading the DC current value at Heat Relay terminal P3-1 and P3-2 the machine began to perform again. Harrumph. Must have been the kicking and banging on the cabinet after I lost a socket tool deep inside. Nonetheless, I have my eye on a resistor and two capacitors on the micro circuit board all of which appear well burned in (i.e. fried). FedEx to deliver a replacement board.